Zirconia Disc Organizer
SKU:
Organize and Simplify Your Dental Lab
The BesQual Block Stand is the ultimate storage solution for your dental lab. Securely store and easily access your milling blocks with its durable design and tough, tear-resistant mesh fabric. Available in single and double with 5 tiers configurations, our stands accommodate multiple block sizes, keeping your workspace clean and efficient.
*Requires assembly. Easy to assemble.*
- Boost productivity and protect your valuable zirconia discs with our robust block stands.
- Available in single (100-disc capacity) and double (200-disc capacity) 5-tier configurations, these stands provide superior organization and prevent damage.
- The tiered design allows for clear sorting by type, shade, and size.
- Constructed from durable, sturdy materials, the stands withstand movements and vibrations, creating a secure and efficient workspace.
CONFIGURATION |
NUMBER OF BLOCKS IT CAN FIT |
SIZE (inches) |
WEIGHT (LBS) |
SINGLE (5 TIERS) |
UP TO 100 BLOCKS |
12.00(d) x 10.00(w) x 22.50(h) |
5 lbs |
DOUBLE (5 TIERS) |
UP TO 200 BLOCKS |
12.00(d) x 20.25(w) x 22.50(h) |
10 lbs |
*Requires assembly. Easy to assemble. Simply follow the assembly instructions.
ASSEMBLY INSTRUCTION
|
|
NO. OF PANELS |
NO. OF MESH CLOTHS |
NO. OF RODS |
PRE-ATTACHED SCREWS |
SCREW CAPS |
2 |
5 |
15 |
30 |
30 |
STEP 1Each rod has double-ended screws pre-attached on both ends.
15 x Rods 30 x Double End Screws |
|
STEP 2Attach each rod, using screw caps, to the first panel, one rod per hole.
1st Panel (15 holes) 15 x Screw Caps Use tools to tighten them securely (Tools not included) |
|
STEP 3Once all the rods are securely attached. Lay the panel on a flat surface.
Note: that each row contains three rods, and the top row is located on the narrower side of the panel. 5 x Rows (Shelves) |
|
STEP 4Insert the mesh cloth on the first & the third rod, skip the middle rod (this will serve as a support once the blocks are placed on it. *Repeat on all 5 rows.
5 x Mesh Cloths |
|
STEP 5Align the holes of second panel with the protruding screws and secure it with screws caps.
2nd Panel (15 holes) 15 x Screw Caps |
|
STEP 6Position the organizer upright, ensuring the wider base is at the bottom and the narrower end is at the top.
You can now organize your milling blocks that allows for clear sorting by type, shade, and size. 
|
|
ASSEMBLY INSTRUCTIONS
|
|
NO. OF PANELS |
NO. OF MESH CLOTHS |
NO. OF RODS |
PRE-ATTACHED SCREWS |
SCREW CAPS |
3 |
10 |
30 |
45 |
30 |
STEP 1a15 rods has double-ended screws pre-attached on both ends.
15 x Rods 30 x Double End Screws |
|
STEP 1b15 rods has double-ended screws pre-attached on one end.
15 x Rods 15 x Double End Screws |
|
STEP 2Attach 1a rods, using screw caps, to the first panel, one rod per hole.
1st Panel (15 holes) 15 x Screw Caps |
|
STEP 3Lay the panel with the attached rods flat on a surface.
|
|
STEP 4Insert the mesh cloth on the first rod, drape the mesh cloth over the second rod, then insert the mesh cloth on third rod. Repeat on all 5 rows. Each row has 3 rods
5 x Mesh Cloths |
|
*Note that each row contains three rods, and the top row is located on the narrower side of the panel.
STEP 5Align the holes of second panel with the protruding screws and secure it with 1b rods.
2nd Panel (15 holes) 15 x 1b rods 15 x Double ended screws (pre-attached) |
|
STEP 6Repeat STEP 4
5 x Mesh Cloths |
|
STEP 7Align the holes of 3rd panel with the protruding screws and secure it with a screw caps.
2nd Panel (15 holes) 15 x Rods 15 x Double ended screws (pre-attached) 15 x Screw Caps 
|
|
STEP 9Position the organizer upright, ensuring the wider base is at the bottom and the narrower end is at the top.
You can now organize your milling blocks that allows for clear sorting by type, shade, and size. 
|
|